We are a Template manufacturing company in Mumbai, India. Our products include Template, Gate Valves,Globe Valves,Non Return Valves / Check Valve,Ball Valves,Pressure Reducing Valves, Air Release Valves,Pressure Relief Valve / Safety Valves,Butterfly Valves,Template, Glandcock Valves / Plug Valve, Fusible Plug Valve,Strainer,Template, Water Level Gauge Glass,Cock,Feed Check Valve,Blow Down Valve, Steam Trap Valve Rotary Joint Valve,Sight Glass Valve,Separators, Needle Valve,Pinch Valve, Foot Valve..
A Template manufacturing company based in  Mumbai India providing Template and all types of Valves, Flanges, Pipes in Mumbai - India
Our Company
Products
Customers
Exports
Feedback
Contact
Home

   

There are three types of steam traps,

  1. Inverted Bucket - As condensate flows into the trap body. Air and steam are trapped in the inverted bucket. This gives a bucket buoyancy and rises with the condensate and quickly closes the valve. When entrapped steam condenses, bucket loses buoyancy, sinks and opens the discharged valve. Air, which has accumulated on top of the trap is immediately expelled by the pressure of the water which follows it to the trap outlet. When air or steam, again enter the inverted bucket the cycle is repeated.

  2. Thermodynamic - Cold condensate or air raise the disc under pressure and flow freely through the trap. When flash steam reaches the trap, the velocity under the disc is instantly increased and pulls the disc onto the seat. Flash pressure on top of the disc snaps it onto its seat to give a tight shut-off. Heat loss from the above disc causes the chamber pressure to decrease and the valve disc opens again to discharge condensate. 3. Ball Float - On startup, main valve is normally closed. When condensate reaches a certain level in the trap, the float begins to rise. This opens the main valve and condensate is drained until the float is lowered.

Material End Connection End Usage Sizes
Bronze
Cast Iron
Cast Steel
Stainless Steel
Screwed
Flanged
Steam " to "2"


[ Valves ] [ Pipes ] [ Pipe Fittings ] [ Flanges] [ Others ]
Template Exporters in IndiaHome : Profile : Valves : Pipes : Pipe Fittings : Flanges: Others : Enquiry : Contact
We are a Valves, Pipes, Pipe Fittings and Flanges manufacturing company in Mumbai, India. Our products include Gate Valves,Globe Valves,Non Return Valves / Check Valve,Ball Valves,Pressure Reducing Valves, Air Release Valves,Pressure Relief Valve / Safety Valves,Butterfly Valves,Glandcock Valves / Plug Valve, Fusible Plug Valve,Strainer, Water Level Gauge Glass,Cock,Feed Check Valve,Blow Down Valve, Steam Trap Valve Rotary Joint Valve,Sight Glass Valve,Separators, Needle Valve,Pinch Valve, Foot Valve..
Template Exporters in IndiaCopyright© K Valves 2004 Template Exporters in IndiaSearch Engine Optmization by: Creative Web Solutions